How to Get rid of the Motor on a Kenmore Washing Machine

1

Disconnect the Kenmore washer energy cord from the outlet. Turn off the two water spigots that provide water to the washing machine.

2

Remove the front trim off the ends in the manage console. You can pull the trim off with the console with your fingers. There will be a screw on every end in the manage console where the console meets the top panel. Remove the screws with a Phillips head screwdriver and lift the front in the control console back toward the wall. The console will rest on service hinges in this position.

3

Locate the electrical connector on the leading rear of the dryer. This is the door switch connector. Grab the connector on each and every side with your fingers and pull the connector apartHow to Take away the Motor on a Kenmore Washing Machine. Insert a large flathead screwdriver in to the brass clips on the leading from the washer cabinet. Push the screwdriver handle toward the rear in the washer to unsnap the clips.

4

Grab every single side of the washer cabinet along with your hands and lift the cabinet away from the washer base and the washer tub.

5

Locate the water pump, which is below the tub and facing the front from the washer. Pry loose the metal clips that secure the water pump to the motor with the flathead screwdriver. You do not need to get rid of the pump hoses. Maneuver the water pump to the left side of the motor and out of one's way.

6

Disconnect the three wiring harness connections from the motor. There will be a big harness on the right side with the motor and two smaller harnesses on the back from the motor. Grab the sides of the harnesses together with your fingers and pull them away from the motor.

7

Remove the screws that secure the motor towards the washer using a socket wrench. There are also two mounting clamps that secure Washing Machine Guide the motor, one at the bottom and one at the top. Pry the bottom clamp off using a flathead screwdriverHow to Remove the Motor on a Kenmore Washing Machine. Location one hand below the motor and pry the upper clamp off Best Washing Machine the motor. Pull the motor out with the gearbox and away from the washer.

How to Hook Up Hoses on a Maytag Washing Machine